Countertop Surgical Instrument Washers
Under counter Surgical Instrument Washers
Cleaning Surgical Instruments effectively with lower costs.
Countertop Surgical Instrument Washers Undercounter Surgical Instrument Washers deliver: higher Surgical Instrument Washer throughput capacity, reduced Surgical Instrument Washer labor & consumable expenses, rapid optimal Surgical Instrument Washer final rinse temperatures, low initial Surgical Instrument Washer cost Washer, lower cost per Surgical Instrument Washer cycle, efficient ‘Surgical Instrument Washer plumbing rapid turnaround.
Countertop Surgical Instrument Washers Undercounter Surgical Instrument Washers
Washer Racks: cut surgical instrument cleaning costs, boost productivity, and
inside-and-out
Contact us for pricing that will lower your surgical instrument cleaning costs.
Countertop Surgical Instrument Washers
Under counter Surgical Instrument Washers
Contact us for product information and pricing.

The Surgical Instrument Washer is provided with a cold-water inlet valve, integral with the drain line to add cold water during draining for assistance in reducing the effluent temperature. A cold-water connection is required when this option is selected. The Surgical Instrument Washer Vapor created during the wash and rinse phases are collected and directed through internal scavenger exhaust ports to an OPTIONAL Vapor Condenser or to the building exhaust. The Surgical Instrument Washer vapor condenser requiring no input of water is provided to remove residual vapors from the wash chamber and to direct the condensed vapors to drain. The Surgical Instrument Washer is provided with an air compressor inter-wired and inter-piped with the automatic control system to supply the air demand required by the washer. The compressor is supplied with regulator, filter, and a holding tank. The Surgical Instrument Washerr is provided with a high-altitude treatment pump for installations where the elevation is 3000 feet or above sea-level. The Surgical Instrument Washer is designed to comply with Seismic Zone 3 and 4 requirements. The Surgical Instrument Washer is provided with a printer to record all cycle program parameters and process performance data. Each program time temperature profile may be printed as required. The Surgical Instrument Washer Ethernet port is provided to permit the capability of downloading cycle real-time performance data to a remote computer terminal. Custom software may be provided to accommodate specific applications. The Surgical Instrument Washer main control panel is inspected and labeled in accordance to the UL standards. The Surgical Instrument Washer is equipped with an integral #316 Stainless Steel tank with level control, automatic fill and overflow protection. Heating is accomplished via either steam or electric heat up to 190F.